2006-2018
M. Ayari, V. Paul-Boncour, J. Lamloumi, H. Mathlouthi, and A. Percheron Guégan (2006), “Study of the structural, thermodynamic and electrochemical properties of the LaNi3.55Mn0.4Al0.3(Co1-xFex)0.75 (0) compounds used as a negative electrode in Ni-MH batteries”, Journal of Alloys and Compounds, 420(1-2), pp. 251-255.
A. Ben Cheikh Larbi, K. Sai, H. Sidhom, and D. Baptiste (2006), “Constitutive Model of micromechanical damage to predict reduction in stiffness of a fatigued SMC composite”, Journal of Materials Engineering and Performance, 15(5), pp. 575-580.
A. Ben Cheikh Larbi, and B. Tlili (2006), “Fretting wear of multilayered PVD TiAlCN/TiAlN/TiAl on AISI 4140 steel”, Surface and Coating Technology, 201(3-4), pp. 1511-1518.
N. Ben Fredj, and M.R. Amamou (2006), “Ground surface roughness prediction based upon experimental design and neural network models”, International Journal of Advanced Manufacturing, 31(1-2), pp. 24-36.
N. Ben Fredj, and M. Mabrouk (2006), “Effects of random aspects of cutting tool wear on surface roughness and tool life”, Journal of Materials Engineering and Performance, 15(5), pp. 519-524.
N. Ben Fredj, and H. Sidhom (2006), “Effects of cryogenic cooling on the fatigue strength of the AISI 304 stainless steel ground components”, Cryogenics, 46(6), pp. 439-448.
N. Ben Fredj, H. Sidhom, and C. Braham (2006), “Ground surface improvement of the austenitic stainless steel AISI 304 using cryogenic cooling”, Surface and Coating Technology, 200(16-17), pp. 4846-4860.
M. Ben Moussa, M. Abdellaoui, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2006), “Investigation of the cycle stability and diffusivity of hydrogen in the MmNi3.55Mn0.4Al0.3Co0.6Fe0.15 hydrogen storage alloy”, Journal of Alloys and Compounds, 407(1), pp. 256-262.
N. Ben Salah, F. Ghanem, and K. Ben Atig (2006), “Numerical Study of Thermal Aspects of Electric Discharge Machining Process”, International Journal of Machine Tools and Manufacture, 46(7-8), pp. 908-911.
M. Tliha, H. Mathlouthi, C. Khaldi, J. Lamloumi, and A. Percheron-Guégan (2006), “Electrochemical properties of the LaNi3.55Mn0.4Al0.3Co0.4Fe0.35 hydrogen storage alloy”, Journal of Power Sources, 160(2), pp. 1391-1394.
B. Bouzakher, T. Ben Ameur, A.R. Yavari, and H. Sidhom (2007), “In situ characterization of crack trajectory and shear bands interaction in metallic glasses”, Journal of Alloys and Compounds, 434-435, pp. 52-55.
H. Dhaou, F. Askri, M. Ben Salah, A. Jemni, S. Ben Nasrallah, and J. Lamloumi (2007), “Measurement and modeling of kinetics of hydrogen sorption by LaNi5 and two related pseudo binary compounds”, International Journal of Hydrogen Energy, 32(5), pp. 576-587.
H. Sidhom, T. Amadou, H. Sahlaoui, and C. Braham (2007), “Quantitative evaluation of aged AISI 316L stainless steel sensitization to intergranular corrosion: comparison between microstructural electrochemical and analytical methods”, Metallurgical and Materials Transactions A, 38(6), pp. 1269-1280.
N. Sidhom, C. Braham, and H.P. Lieurade (2007), “Fatigue life evaluation of shot peened Al-Alloys 5083 H11 T-Welded joints by experimental and numerical approaches”, Welding in the World, 51(1-2), pp. 50-57.
M. Tliha, C. Khaldi, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2007), “Electrochemical investigation of the iron containing and no iron-containing AB5-type negative electrodes”, Journal of Alloys and Compounds, 440(1-2), pp. 323-327.
M. Tliha, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2007), “AB5-type hydrogen storage alloy used as anodic materials in Ni-MH batteries”, Journal of Alloys and Compounds, 436(1-2), pp. 221-225.
M. Tliha, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2007), “Electrochemical kinetic parameters of metal hydride battery electrode”, International Journal of Hydrogen Energy, 32(5), pp. 611-614.
R. Amamou, N. Ben Fredj and F. Fnaiech (2008), “Improved Method for Grinding Force Prediction Based on Neural Network”, International Journal of Advanced Manufacturing, 39(7), pp. 656-668.
H. Badreddine, C. Labergère, K. Saanouni, W. Rajhi, A. Rassineux, D. Kircher (2008), “F.E. elastoplastic damage model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation”, International Journal of Material Forming, 1(1), pp. 109-112.
M. Ben Moussa, H. Abdellaoui, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan (2008), “Electrochemical properties of the MmNi3.55Mn0.4Al0.3Co0.75-xFex (x=0.55 and 0.75) compounds”, Journal of Alloys and Compounds, 458(1-2), pp. 410-414.
N. Ben Salah, F. Ghanem, and K. Ben Atig (2008), “Thermal and Mechanical Numerical Modelling of Electric Discharge Machining Process”, Communications in Numerical Methods in Engineering, 24(12), pp. 2021-2034.
B. Ben Fathallah, N. Ben Fredj, H. Sidhom, C. Braham, and Y. Ichida (2009), “Effects of abrasive type cooling mode and peripheral grinding wheel speed on the AISI D2 steel ground surface integrity”, International Journal of Machine Tools and Manufacture, 49(3-4), pp. 261-272.
B. Bouzakher, T. T. Ben Ameur, and H. Sidhom (2009), “IR thermographic observation and shear bands plasticity analysis in Fe-based metallic glass”, Journal of Alloys and Compounds, 483(1-2), pp. 676-681.
C. Khaldi, H. Mathlouthi, and J. Lamloumi (2009), “A comparative study, of 1M and 8M KOH electrolyte concentrations, used in Ni-MH batteries”, Journal of Alloys and Compounds, 469(1-2), pp. 464-471.
C. Khaldi, H. Mathlouthi, and J. Lamloumi (2009), “Electrochemical impedance spectroscopy study of the metal hydride alloy/electrolyte junction”, Journal of Alloys and Compounds, 479(1-2), pp. 284-289.
K. Hajlaoui, M. A. Yousfi, Z. Tourki, G. Vaughan, and A. R. Yavari, (2010), “On the free volume kinetics during isochronal structural relaxation of Pd-based metallic glass: Effect of temperature and deformation”, Journal of Materials Science, 45(12), pp. 3344-3349.
C. Khaldi, S. Boussami, B. Ben Rejeb, H. Mathlouthi, and J. Lamloumi (2010), “Corrosion effect on the electrochemical properties of LaNi3.55Mn0.4Al0.3Co0.75 and LaNi3.55Mn0.4Al0.3Fe0.75 negative electrodes used in Ni–MH batteries”, Materials Science and Engineering: B, 175(1), pp. 22-28.
H. Sidhom, T. Amadou, and C. Braham (2010), “Evaluation by the Double Loop Electrochemical Potentiokinetic Reactivation Test of Aged Ferritic Stainless Steel Intergranular Corrosion Susceptibility”, Metallurgical and Materials Transactions A, 41(12), pp. 3136-3150.
M.A. Terres, S. Ben Mohamed, and H. Sidhom (2010), “Influence of ion nitriding on fatigue strength of low-alloy (42CrMo4) steel: Experimental characterization and predictive approach”, International Journal of Fatigue, 32(11), pp. 1795-1804.
M. Tliha, S. Boussami, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2010), “Electrochemical characteristics of AB5-type hydrogen storage alloys”, Journal of Alloys and Compounds, 506(2), pp. 559-564.
M. Tliha, S. Boussami, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2010), “Kinetic behavior of electrodes low-Co AB5-type metal hydride”, Materials Science and Engineering: B, 175(1), pp. 60-64.
N. Ben Salah, I. Baaziz, D.R. Rousse, K. Zlaoui, and Y. Dutil (2011), “Magnetic Control of Natural Convection in the Horizontal Bridgman Configuration: Symmetric and Non Symmetric Cross Sections”, International Journal of Computational Fluid Dynamics, 25(3), pp 127-138.
Y. Dutil, D.R. Rousse, Ben Salah, N., S. Lassue, and L. Zalewski (2011), “A review on phase-change materials: Mathematical modeling and simulations”, Renewable and Sustainable Energy Reviews, 15(1), pp. 112-130.
F. Ghanem, N. Ben Fredj, H. Sidhom, and C. Braham (2011), “Effects of finishing processes on the fatigue life improvements of electro-machined surfaces of tool steel”, International Journal of Advanced Manufacturing Technology, 52(5-8), pp. 583-595.
K. Hajlaoui, M. A. Yousfi, Z. Tourki, G. Vaughan, and A. R. Yavari (2011), “Kinetics of isothermal structural relaxation in metallic glasses measured by real-time diffraction using synchrotron radiation”, Philosophical Magazine Letters, 91(2), pp. 122-133.
Z. Ktari, Z. Tourki, H. Sidhom, and M. A. Gahbiche (2011), “On the interaction between transformation induced plasticity and the austenitic stainless steel anisotropy (AISI304) under shear loading path”, Materials and Design, 32(7), pp. 3765-3771.
D.R. Rousse, F. Asllanaj, N. Ben Salah, and S. Lassue (2011), “A Consistent Interpolation Function for the Solution of Radiative Transfer on Triangular Meshes. II- Validation”, Numerical Heat Transfer Part B: Fundamentals, 59(2), pp. 116-129.
M. Tliha, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2011), “Electrochemical study of intermetallic metal hydride as an anode material for Ni-MH batteries”, Journal of Solid State Electrochemistry, 15(9), 1963-1970.
Z. Tourki, and E. Ghorbel (2011), “Numerical study of laser diode transmission welding of a polypropylene mini-tank: temperature field and residual stresses distribution”, Polymer Testing, 30(1), pp. 23-34.
M. A. Yousfi, K. Hajlaoui, Z. Tourki, and A. R. Yavari (2011), “Constitutive Rheological Modeling of Flow Serration Behaviour in Metallic Glasses Showing Nanocrystallization during Deformation”, Journal of Nanomaterials, Volume 2011, Article ID 910962, 8 pages.
S. Azizi, M. Braik, C. Dridi, H. Ouada, A. Ryback, and J. Davenas (2012), “Study of charge transport in P3HT: SiNW-based photovoltaic devices”, Applied Physics A: Materials Science and Processing, 108(1), pp. 99-106.
N. Ben Moussa, H. Sidhom, and C. Braham (2012), “Numerical and experimental analysis of residual stress and plastic strain distributions in machined stainless steel”, International Journal of Mechanical Sciences, 64(1), pp. 82-93.
S. Boussami, C. Khaldi, J. Lamloumi, H. Mathlouthi, and H. Takenouti (2012), “Electrochemical study of LaNi3.55Mn0.4Al0.3Fe0.75 as negative electrode in alkaline secondary batteries”, Electrochimica Acta, 69, pp. 203-208.
M. A. Terres, N. Laalai, and H. Sidhom (2012), “Effect of nitriding and shot-peening on the fatigue behavior of 42CrMo4 steel: Experimental analysis and predictive approach”, Materials and Design, 35, pp. 741-748.
M. A. Terres, and H. Sidhom (2012), “Fatigue Life Evaluation of 42CrMo4 Nitrided Steel by Local Approach: Equivalent Strain-Life Time”, Materials and Design, 33, pp. 444-450.
M. Ben Moussa, M. Abdellaoui, J. Lamloumi, and A. Percheron Guégan (2013), “Investigation on the structure, thermodynamic and electrochemical properties of the MmNi3.55Mn0.4Al0.3Fe0.75 compound used as negative electrode in Ni–MH batteries”, Journal of Alloys and Compounds, 575, pp. 414–418.
S. Boussami, C. Khaldi, J. Lamloumi, H. Mathlouthi, H. Takenouti, and V. Vivier (2013), “The impedance response of LaY2Ni9 negative electrode materials after activation”, Journal of Physics and Chemistry of Solids, 74, pp. 1369–1374.
N. Jouini, A. Revel, P. E. Mazeran, and M. Bigerelle (2013), “The ability of precision hard turning to increase rolling contact fatigue life”, Tribology International, 59, pp. 141–146.
N. Jouini, P. Revel, G. Thoquenne, and F. Lefebvre (2013), “Characterization of surfaces obtained by precision hard turning of AISI 52100 in relation to RCF life”, Procedia Engineering, 66, pp. 793-802.
C. Khaldi, S. Boussami, M. Tliha, S. Azizi, N. Fenineche, O. ElKedim, H. Mathlouthi, and J. Lamloumi (2013), “The effect of the temperature on the electrochemical properties of the hydrogen storage alloy for nickel–metal hydride accumulators”, Journal of Alloys and Compounds, 574, pp. 59-66.
K. Khlifi, and A. Ben Cheikh Larbi (2013), “Investigation of adhesion of PVD coatings using various approaches”, Surface Engineering, 29(7), pp. 555-560.
K. Makhlouf, N. Sidhom, A. Khlifi, H. Sidhom, and C. Braham (2013), “Low cycle fatigue life improvement of AISI 304 by initial and intermittent wire brush hammering”, Materials and Design, 52, pp. 1088-1098.
H. Sahlaoui, M. Guedri, and H. Sidhom (2013), “Effect of uncertainty parameters on graphene sheets Young’s modulus prediction”, Journal of Mechanical Science and Technology, 27(9), pp. 2769-2774.
H. Sahlaoui, and H. Sidhom (2013), “Experimental investigation and analytical prediction of -phase precipitation in AISI 316L austenitic stainless”, Metallurgical and Materials Transactions A, 44(7), pp. 3077-3083.
H. Sidhom, F. Ghanem, T. Amadou, G. Gonzalez, and C. Braham (2013), “Effect of electric discharge machining (EDM) on the AISI316L SS white layer microstructure and corrosion resistance”, International Journal of Advanced Manufacturing Technology, 65(1-4), pp. 141-153.
A.V. Stanishevsky, M. J. Walock, Y. Zou, L. I. Mhoff, A. Zairi, and C. Nouveau (2013), “Growth of WC-Cr-N and WC-Al-N coatings in a RF-magnetron sputtering process”, Vacuum, 90(1), pp. 129-134.
I. Baaziz, N. Ben Salah, and S. Kaddeche (2014): “Magnetic control of natural convection in the horizontal Bridgman configuration using a spectral method: Transversal plan”, International Journal of Computational Fluid Dynamics, 28(6-10), pp. 339-350.
A. Benali, S. Azizi, M. Bejar, E. Dhahri, and M. F. P. Graça (2014), “Structural, electrical and ethanol sensing properties of double-doping LaFeO3 perovskite oxides”, Ceramics International, 40, pp. 14367-14373.
Y. Ben Belgacem, C. Khaldi, S. Boussami, J. Lamloumi, and H. Mathlouthi (2014), “Electrochemical properties of LaY2Ni hydrogen storage alloy, used as an anode in nickel-metal hydride batteries”, Journal of Solid State Electrochemistry, 18, pp. 2019–2026.
B. Hosni, X. Li, C. Khaldi, O. ElKedim, and J. Lamloumi (2014), “Structure and electrochemical hydrogen storage properties of Ti2Ni alloy synthesized by ball milling”, Journal of Alloys and Compounds, 615, pp. 119-125.
N. Jouini, P. Revel, and M. Bigrelle (2014), “Relevance of Roughness Parameters of Surface Finish in Precision Hard Turning”, Scanning, 36(1), pp. 86–94.
K. Khlifi, and A. Ben Cheikh Larbi (2014), “Mechanical properties and adhesion of TiN monolayer and TiN/TiAlN nano-layer coatings”, Journal of Adhesion Science and Technology, 28(1), pp. 85-96.
W. Rajhi, K. Saanouni, and H. Sidhom (2014), “Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation”, International Journal of Damage Mechanics, 23(8), pp. 1211–1256.
N. Sidhom, N. Ben Moussa, S. Janeb, C. Braham, and H. Sidhom (2014), “Potential fatigue strength improvement of AA 5083-H111 notched parts by wire brush hammering: Experimental analysis and numerical simulation”, Materials and Design, 64, pp. 503–519.
N. Sidhom, K. Makhlouf, A. Khilifi, C. Braham, and H. Sidhom (2014), “Assessment of low cycle fatigue improvement of machined AISI 316 stainless steel by brush hammering”, Fatigue and Fracture of Engineering Materials and Structures, 37, pp.1087–1100.
M. Tliha, C. Khaldi, S. Boussami, N. Fenineche, O. ElKedim, H. Mathlouthi, and J. Lamloumi (2014), “Kinetic and thermodynamic studies of hydrogen storage alloys as negative electrode materials for Ni/MH batteries: a review”, Journal of Solid State Electrochemistry, 18, pp. 577–593.
H. Yahyaoui, H. Sidhom, C. Braham, and A. Baczmanski (2014), “Effect of inter lamellar spacing on the elastoplastic behavior of C70 pearlitic steel: Experimental results and self-consistent modeling”, Materials and Design, 55, pp. 888–897.
A. Zairi, C. Nouveau, A. Ben Cheikh Larbi, A. Lost, N. Martin, and A. Besnard (2014), “Effect of RGPP process on properties of Cr-Si-N coatings”, Surface Engineering, 30(8), pp. 606-611.
S. Azizi, A. Benali, M. Bejar, E. Dhahri, M. P. F. Graça and M.A. Valente (2015), “Physical properties and ethanol sensing of perovskite La0.8Pb0.2Fe1-xMgxO3 compounds”, Journal of Alloys and Compounds, 644, pp. 304-307.
A. Azizi, M. Salah, H. Nefzi, C. Khaldi, F. Sediri, E. Dhahri, and J. Lamloumi (2015), “Structure, volumetric adsorption method and electrochemical hydrogen storage properties of vanadium oxide nanotubes VOx-NTs”, Journal of Alloys and Compounds, 648, pp. 244-252.
Y. Ben Belgacem, C. Khaldi, J. Lamloumi, and H. Takenouti (2015), “Effect of the discharge rate on the electrochemical properties of LaY2Ni9 hydrogen storage alloy”, Journal of Alloys and Compounds, 631, pp. 7-14.
N. Ben Jaber, R. Drevet, J. Fauré, C. Demangel, S. Potiron, A. Tara, A. Ben Cheikh Larbi, and H. Benhayoune (2015), “A new process for the thermal treatment of calcium phosphate coatings electrodeposited on Ti6Al4V substrate”, Advanced Engineering Materials, 17(11), pp. 1608-1615.
K. Khlifi, H. Dhiflaoui, L. Zoghlami and A. Ben Cheikh Larbi (2015), “Study of mechanical behavior, deformation, and fracture of nano multilayer coatings during micro indentation and scratch test”, Journal of Coatings Technology and Research, 12(3), pp. 513-524.
K. Khlifi, H. Dhiflaoui, L. Zoghlami and A. Ben Cheikh Larbi (2015), “Mechanical characterization of CrN/CrAIN multilayer coatings deposited by magnetron sputtering system”, Journal of Materials Engineering and Performance, 24(10), pp. 4077-4082.
H. Sidhom, H. Yahyaoui, C. Braham and G. Gonzalez (2015), “Analysis of the Deformation and Damage Mechanisms of Pearlitic Steel by EBSD and “in-situ” SEM Tensile Test”, Journal of Materials Engineering and Performance, 24(7), pp. 2586-2596.
A. Tlili, F. Ghanem and N. Ben Salah (2015), “A Contribution in EDM Simlation Field”, International Journal of Advanced Manufacturing Technology, 79(5), pp. 921-935.
H. Yahyaoui, N. Ben Moussa, C. Braham, N. Ben Fredj and H. Sidhom (2015), “Role of machining defects and residual stress on the AISI 304 fatigue crack nucleation”, Fatigue and Fracture of Engineering Materials and Structures, 38(4), pp. 420-433.
Y. Ben Belgacem, C. Khaldi, J. Lamloumi and H. Takenouti (2016), “The electrochemical performance of AB3-type hydrogen storage alloy as anode material for nickel metal hydride accumulators”, Journal of Solid State Electrochemistry, 20(7), pp. 1949–1959.
D. Drevet, N. Ben Jaber, J. Fauré, A. Tara, A. Ben Cheikh Larbi and H. Benhayoune (2016), “Electrophoretic Deposition (EDP) of Nano-Hydroxyapatite Coatings with Improved Mechanical Properties on Prosthetic Ti6Al4V Substrates”, Surface and Coatings Technology, 301, pp. 94-99.
A. Guitouni, I. Chaieb, A. Ben Rhouma and N. Ben Fredj (2016): “Effects of Jet Pressure on the Ground Surface Quality and CBN Wheel Wear in Grinding AISI 690 Nickel-Based Super alloy”, Journal of Materials Engineering and Performance, 25(11), pp. 5055–5064.
A. Kaabi, C. Khaldi and J. Lamloumi (2016), “Thermodynamic and kinetic parameters and high rate discharge-ability of the AB5-type metal hydride anode”, International Journal of Hydrogen Energy, 41(23), pp. 9914–9923.
A. Kaabi, M. Tliha, A. Dhahri, C. Khaldi and J. Lamloumi (2016), “Study of electrochemical performances of perovskite-type oxide LaGaO3 for application as a novel anode material for Ni-MH secondary batteries”, Ceramics International, 42(10), pp. 11682–11686.
P. Revel, N. Jouini, G. Thoquenne, and F. Lefebvre (2016), “High precision hard turning of AISI 52100 bearing steel”, Precision Engineering, 43, pp. 24-33.
M. Tliha, C. Khaldi and J. Lamloumi (2016), “AC Impedance Behavior of LaNi3.55Mn0.4Al0.3Co0.6Fe0.15 Hydrogen-Storage Alloy: Effect of Surface Area”, Journal of Materials Engineering and Performance, 25(4), pp. 1578-1585.
A. Zairi, A. Ben Cheikh Larbi, A. Lost, and M. H. Staia (2016), “Effect of O2 increase on properties of vanadium oxide coatings”, Surface Engineering, 32(6), pp. 404-410.
S. Azizi, M. Belhaj, S. Zargouni, and C. Dridi (2017), “Correlation between composition, morphology and optical properties of PVK:n-ZnO:CTAB thin films”, Applied Physics A Materials Sciences & Processing, 123, pp. 475-482.
S. Ben Amara, J. Dhahri and N. Ben Fredj (2017): “Process True Capability Evaluation with the Consideration of Measurement System Variability and Expected Quality Loss”, Quality and Reliability Engineering International, 33(5), pp. 937–944.
S. Ben Amara, J. Dhahri, S. Samet and N. Ben Fredj (2017): “Method for improving the measurement system selection depending on part and process precisions”, Measurement, 98, pp. 103-111.
Y. Ben Belgacem, C. Khaldi, J. Lamloumi (2017), “The effect of the discharge rate on the electrochemical properties of AB3-type hydrogen storage alloy as anode in nickel-metal hydride batteries”, International Journal of Hydrogen Energy, 42(17), pp. 12797-12807.
A. Ben Rhouma, T. Amadou, H. Sidhom and C. Braham (2017), “Correlation between Microstructure and Intergranular Corrosion Behavior of Low Delta-Ferrite Content AISI 316L Aged in the Range 550-770°C”, Journal of Alloys and Compounds, 708, pp. 871-886.
Y. Dabaki, S. Boussami, C. Khaldi, H. Takenouti, O. ElKedim, N. Fenineche and J. Lamloumi (2017), “The effect of ZnO addition on the electrochemical properties of the LaNi3.55Mn0.4Al0.3Co0.2Fe0.55 electrode used in nickel–metal hydride batteries”, Journal of Solid State Electrochemistry, 21(4), pp. 1157–1164.
H. Dhiflaoui, N. Ben Jaber, F. Simescu Lazar, J. Faure, A. Ben Cheikh Larbi and H. Benhayoune (2017), “Effect of annealing temperature on the structural and mechanical properties of coatings prepared by electrophoretic deposition of TiO2 nanoparticles”, Thin Solid Films, 638, pp. 201–212.
H. Dhiflaoui, K. Khlifi and A. Ben Cheikh Larbi (2017), “Multi-property improvement of TiO2-WO3 mixed oxide films deposited on 316L stainless steel by electrophoretic method”, Surface and Coatings Technology, 326, Part A, 45-52.
A. Guitouni, N. Ben Fredj and A. Mikhaylov (2017): “Finishing operation selection of coupling teeth depending on shaft misalignment”, The International Journal of Advanced Manufacturing Technology, 90(1–4), pp. 377–382.
B. Hosni, C. Khaldi, O. ElKedim, N. Fenineche, and J. Lamloumi (2017), “Electrochemical properties of Ti2Ni hydrogen storage alloy”, International Journal of Hydrogen Energy, 42(2), pp. 1420-1428.
A. Kaabi, M. Tliha, Y. Ben Belgacem, A. Dhahri, C. Khaldi and J. Lamloumi (2017), “Influence of electrolyte concentration on the electrochemical characteristics of LaGaO3 perovskite oxide as novel anode material for Ni/MH batteries”, Ceramics International, 43(17), pp. 15743–15746.
M. Salah, S. Azizi, A. Boukhachem, C. Khaldi, M. Amlouk and J. Lamloumi (2017), “Structural, morphological, optical and photodetector properties of sprayed Li-doped ZnO thin films”, Journal of Materials Science, 52(17), pp. 10439-10454.
M. A. Terres, R. Bechouel, and S. Ben Mohamed (2017), “Low Cycle Fatigue Behaviour of Nitrided Layer of 42CrMo4 Steel”, International Journal of Materials Science and Applications, 6(1), pp.18-27.
N. Barbana, A. Ben Youssef, H. Dhiflaoui and L. Bousselmi (2017), “Preparation and Characterization of Photovoltaic TiO2 Films on Functionalized Stainless Steel”, Journal of Materials Science, 53(5), pp. 3341-3363.
A. Ben Ahmed, M. Ben Houria, R. Fathallah, and H. Sidhom (2018), “The effect of interacting defects on the HCF behavior of Al-Si-Mg aluminium alloys”, Journal of Alloys and Compounds, 779, pp. 619-628.
N. Ben Moussa, K. Gharbi, I. Chaieb, and N. Ben Fredj (2018), “Improvement of AISI 304 austenitic stainless steel low-cycle fatigue life by initial and intermittent deep rolling”, International Journal of Advanced Manufacturing Technology, pp. 1-15.
M. Frija, M. Ayeb, R. Seddik, R. Fathallah, and H. Sidhom (2018), “Optimization of peened-surface laser shock conditions by method of finite element and technique of design of experiments”, International Journal of Advanced Manufacturing Technology, 97(1-4), pp. 51-69.
B. Hosni, N. Fenineche, O. ElKedim, C. Khaldi, and J. Lamloumi (2018), “Structural and electrochemical properties of TiFe alloys synthesized by ball milling for hydrogen storage”, Journal of Solid State Electrochemistry, 22, pp. 17-29.
B. Hosni, C. Khaldi, O. ElKedim, N. Fenineche, and J. Lamloumi (2018), “Structure and electrochemical hydrogen storage properties of Ti-Fe-Mn alloys for Ni-MH accumulator applications”, Journal of Alloys and Compounds, 781, 1159-1168.
A. Kaabi, M. Tliha, A. Dhahri, C. Khaldi, N. Fenineche, O. ElKedim, and J. Lamloumi (2018), “Effect of temperature on behavior of perovskite-type oxide LaGaO3 used as a novel material for Ni-MH secondary batteries”, International Journal of Energy Research, 42, pp. 2953-2960.
M. Marciszko, A. Baczmański, M. Klaus, C. Genzel, A. Oponowicz, S. Wroński, M. Wróbel, C. Braham, H. Sidhom, and R. Wawszczak (2018), “A multireflection and multiwavelength residual stress determination method using energy dispersive diffraction”, Journal of Applied Cristallography, 51(3), pp. 732-745.
M. Salah, S. Azizi, A. Boukhachem, C. Khaldi, M. Amlouk, and J. Lamloumi (2018), “Effects of lithium doping on: microstructure, morphology, nanomechanical properties and corrosion behavior of ZnO thin films grown by spray pyrolysis technique”, Journal of Materials Science: Materials in Electronics, pp. 1-19.
S. Selmi, S. Ben Amara, N. Ben Fredj, A. Kobi, and I. Ben Salah (2018), “Process capability indices and , R control chart limit adjustments by taking into account measurement system errors”, International Journal of Advanced Manufacturing Technology, 95(5-8), pp. 1919-1930.
W. Zhang, W. Habashi, N. Ben Salah, D. Isola, and G. S. Baruzzi (2018), “Edge-Based Finite Element Formulation of Hypersonic Flows Under an Imposed Magnetic Field”, AIAA Journal 56(7), pp. 2756-2768.
A. Tlili, and F. Ghanem (2018), “A numerical investigation on the local mechanical behavior of a 316-L part during and after an EDM basic electrical discharge”, International Journal of Advanced Manufacturing Technology, 99(9-12), pp. 2755-2776.
W. Zayani, S. Azizi, K. S. El-Nasser, Y. Ben Belgacem, I. O. Ali, N. Fenineche, and H. Mathlouthi (2018), “New nanoparticles of (Sm,Zn)-codoped spinel ferrite as negative electrode in Ni/MH batteries with long-term and enhanced electrochemical performance”, International Journal of Hydrogen Energy, doi.org/10.1016/j.ijhydene.2018.10.220.
R. Saidi, B. Ben Fathallah, T. Mabrouki, S. Belhadi, and M. A. Yallese (2018), “Modeling and optimization of the turning parameters of cobalt alloy (Sellite 6) based on RSM and desirability function”, International Journal of Advanced Manufacturing Technology, pp. 1-24.
Y. Ishida, R. Sato, Y. Morimoto, Y. Ohsawa, and N. Ben Fredj (2006), “Formation mechanism of finished surface in ultrahigh-speed grinding with cubic born nitride (cBN) wheels”, Japanese Society of Mechanical Engineering International Journal Series C, 49(1), pp. 100-105.
C. Khaldi, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2006), “Electrochemical Studies on the effects of cobalt substitution by iron in LaNi3.55Mn0.4Al0.3Co0.75 alloys”, Physical and Chemistry News, 29, pp. 76-80.
I. Trigui, H. Sidhom, and C. Braham (2006), “Influence des mécanismes de décomposition de la ferrite sur la résistance à la corrosion d’un acier inoxydable austéno-ferritique vieilli”, Matériaux et Techniques, 93(9-12), pp. 319-333.
F. Ghanem, K. Ben Atig, N. Ben Salah, et C. Braham (2007), “Prédiction par calcul de la rugosité totale d’une surface usinée par électroérosion”, Matériaux et Techniques, 94(6), pp. 419-428.
C. Khaldi, H. Mathlouthi, J. Lamloumi, and A. Percheron-Guégan (2008), “Electrochemical Study of LaNi3.55Mn0.4Al0.3Fe0.75 Negative electrode material”, Physical and Chemistry News, 40, pp. 139-142.
Y. Ishida, R. Sato, M. Fujimoto, N. Ben Fredj (2009), “Fractal Analysis of Self-Sharpening Phenomenon in cBN Grinding”, Key Engineering Materials, 389-390, pp. 42-47.
M.A. Terres, et H. Sidhom (2010), “Influence de la nitruration gazeuse sur la tenue en fatigue flexion des composants nitrurés en acier 42CrMo4”, Matériaux et Techniques, 98(2), pp. 171-184.
Y. Ishida, and N. Ben Fredj (2011), “High-efficiency grinding of cold-work die steel with ultrafine-crystalline cBN abrasive grains”, International Journal of Machining and Machinability of Materials, 9(3-4), pp. 197-208.
W. Jomaa, N. Ben Fredj, I. Zaghbani, and V. Songmene (2011), “Non-conventional turning of hardened AISI D2 tool steel”, International Journal of Advances in Machining and Forming Operations, 3(2), pp. 93-126.
N. Sidhom, H. Sidhom, C. Braham, and J. Lédion (2011), “Effects of brushing and shoot-peening residual stresses on the fatigue resistance of machined metal surfaces: Experimental and predicting approaches”, Materials Science Forum, 681, pp. 290-295.
H. Sahlaoui, K. Makhlouf, and H. Sidhom (2013), “Comparative study of the thermal shock resistance of an industrial tableware porcelain”, Journal of Engineering, Volume 2013, Paper Id 972019, 7 pages.
A. Baczmanski, E. Gadaliska, S. Wroski, C. Braham, W. Seiler, M. François, L. Le Joncour, B. Panicaud, T. Buslaps, H. Yahyaoui, and H. Sidhom (2014), “Study of mechanical behaviour of polycrystalline materials at the mesoscale using high energy X-ray diffraction”, Advanced Materials Research, 996, pp. 118-123.
N. Ben Moussa, Z. El Adel, H. Sidhom, and C. Braham (2014), “Numerical assessment of residual stress induced by machining of aluminum alloy”, Advanced Materials Research, 996, pp. 628-633.
N. Ben Moussa, N. Sidhom, H. Sidhom, and C. Braham (2014), “Prediction of cyclic residual stress relaxation by modeling approach”, Advanced Materials Research, 996, pp. 743-748.
H. Sidhom, N. Ben Moussa, B. Ben Fathallah, N. Sidhom, and C. Braham (2014), “Effect of surface properties on the fatigue life of manufactured parts: Experimental analysis and multi-axial criteria”, Advanced Materials Research, 996, pp. 715-721.
H. Yahyaoui, H. Sidhom, C. Braham, A. Baczmanski, M. François, and W. Seiler (2014), “Effect of inter lamellar spacing on the monotonic behavior of C70 pearlitic steel”, Advanced Materials Research, 996, pp. 88-93.
H. Dhiflaoui, K. Khlifi and A. Ben Cheikh Larbi (2015), “Nano indentation of Thin Films Prepared by Physical Vapor Deposition”, World Academy of Science, Engineering and Technology, International Journal of Materials and Metallurgical Engineering, 9(2), pp. 368-371.
K. Khlifi, H. Dhiflaoui, L. Zoghlami and A. Ben Cheikh Larbi (2015), “Multi-cycle Nanoindentation Studies on TiN/TiAIN Nano-Multilayer Coating/ Effects of Mechanical Properties and Coating Structure”, Applied Mechanics and Materials Journal, 798, pp. 367-371.
S. Ben Amara, J. Dhahri, and N. Ben Fredj (2016), “Control chart limits based on true process capability with consideration of measurement system error”, International Journal of Metrology and Quality Engineering, 7(4), pp. 401-408.
H. Dhiflaoui, K. Khlifi, and A. Ben Cheikh Larbi (2016), “Effect of deposition parameters on electrophoretically deposited TiO2”, Research and Reviews: Journal of Material Sciences, 4(3), pp. 7-15.
H. Dhiflaoui, K. Khlifi and A. Ben Cheikh Larbi (2017), “Wear behavior and mechanical properties of TiO2 coating deposited Electrophoretically on 316L Stainless steel”, Journal of Tribology, 140(3), Paper Id 031603.
M. A. Terres, B. Ben Fathallah, and A. Ghanem (2017), “Effects of Surface Pre-treatment on the Nitrided Layers Properties”, American Journal of Mechanical and Industrial Engineering, 2(1), pp. 41-47.
M. A. Terres, L. Ammari, and A. Chérif (2017), “Study of the Effect of Gas Nitriding Time on Microstructure and Wear Resistance of 42CrMo4 Steel”, Materials Sciences and Applications, 8(6), pp.493-507.
- Chokri Khaldi (2011), “Etudes physico-chimiques des alliages LaNi3.55Mn0.4Al0.3Co0.75-xFex : Application aux accumulateurs nickel métal-hydrure”, Editions Universitaires Européennes (ISBN : 978-613-1-59802-9).
- Chokri Khaldi (2014), “Caractérisations électrochimiques des électrodes négatives : Application aux batteries nickel-métal hydrure”, Editions Universitaires Européennes (ISBN 978-3-8417-9252-5).
- C. Khaldi (2018), “Les générateurs électrochimiques, Piles ordinaires commercialisées & accumulateurs & piles à combustibles, Eléments de cours & 19 épreuves corrigées”, Editions Universitaires Européennes (ISBN 978-620-2-27703-7).
H. Sahlaoui, M. Soula, et A. Néji (2012), “Mécanique des systèmes des solides, Tome 1 : Paramétrage-Cinématique-Statique”, Centre des Publications Universitaires (ISBN 978-9973-37-723-4), Tunisie.
N. Ben Fredj, A. Djemail, A. Ben Rhouma, H. Sidhom, and C. Braham (2006), “Effects of the cryogenic wire brushing on the surface integrity and the fatigue life improvement of the AISI 304 stainless steel ground components”, In: Fracture of nano and engineering materials and structures, pp. 77-86, Springer (ISBN 978-1-4020-4971-2).
N. Ben Fredj, H. Sidhom, and C. Braham (2006), “Effect of the cryogenic wire brushing on the surface integrity and the fatigue life improvement of the AISI 304 stainless steel ground components”, In: Residual Stress and its Effects on Fatigue and Fracture, pp. 1303-1304, Springer (ISBN 978-1-4020-5328-3).
Z. El Adel, N. Ben Moussa, H. Yahyaoui, and H. Sidhom (2013), “Surface integrity after orthogonal cutting of aeronautical aluminum alloy 7075-T651”, In: Lectures Notes in Mechanical Engineering, Design and Modeling of Mechanical Systems, pp. 485-492, Springer (ISBN 978-3-642-37142-4).
Y. Ben Belgacem, C. Khaldi, S. Boussami, H. Mathlouthi, and J. Lamloumi (2014), “Electrochemical properties of the LaY2Ni9 hydrogen storage alloy”, 5th International Renewable Energy Congress (IREC2014), IEEE Conference Publications (ISBN 978-1-4799-2195-9).
B. Hosni, C. Khaldi, S. Boussami, M. Tliha, H. Mathlouhi, J. Lamloumi, N. Feninech, and O. El-Kedim (2014), “Electrochemical hydrogen storage properties of Ti2Ni alloy prepared by mechanical alloying”, 5th International Renewable Energy Congress (IREC2014), IEEE Conference Publications (ISBN 978-1-4799-2195-9).
Y. Ben Belgacem, C. Khaldi, and J. Lamloumi (2015), “Electrochemical hydrogenation of LaY2Ni9 anode at C/3 and C/10 discharge rates for nickel-metal hydride batteries”, 6th International Renewable Energy Congress (IREC2015), IEEE Conference Publications (ISBN 978-1-4799-7947-9).
C. Khaldi, and J. Lamloumi (2015), “Electrochemical study of the cobalt-containing- and non-cobalt-containing AB5 alloys used as negative electrodes in nickel-metal hydride batteries”, In: Progress in Clean Energy, Volume 2: Novel Systems and Applications, Chapter 1, pp. 3-14, Springer (ISBN 978-3-319-17030-5).
K. Khlifi, H. Dhiflaoui, A. Ben Cheick Larbi, and A. Beskri (2015), “Degradation of mechanical properties of TiN Coatings under cyclic nanoindentation”, In: Lectures Notes in Mechanical Engineering: Design and Modeling of Mechanical Systems II, pp. 349-356, Springer (ISBN 978-3-319-17526-3).
K. Khlifi, H. Dhiflaoui, and A. Ben Cheick Larbi (2015), “Scratch adhesion characteristics of PVD Cr/CrN deposited on high speed steel and silicon substrates”, In: Multiphysics Modelling and Simulation for Systems Design and Monitoring, Volume 2, pp. 453-458, Springer (978-3-319-14531-0).
M. Salah, S. Azizi, F. Sediri, C. Khaldi, and J. Lamloumi (2015), “Nanotube of vanadium oxide used as a negative electrode in Ni-MH accumulator”, 6th International Renewable Energy Congress (IREC2015), IEEE Conference Publications (ISBN 978-1-4799-7947-9).
Y. Ben Belgacem, C. Khaldi, and J. Lamloumi (2016), “Effect of the charge/discharge current densities on the electrochemical hydrogen storage performances of CeY2Ni9 alloy”, 7th International Renewable Energy Congress (IREC2016), IEEE Conference Publications (ISBN 978-1-4673-9768-1).
A. Kaabi, M. Tliha, A. Dhahri, C. Khaldi, and J. Lamloumi (2016), “Electrochemical properties of the LaGaO3 perovskite-type oxide used as negative electrode in Ni/MH accumulators”, 7th International Renewable Energy Congress (IREC2016), IEEE Conference Publications (ISBN 978-1-4673-9768-1).
M. Salah, S. Azizi, A. Boukhachem, C. Khaldi, and J. Lamloumi (2016), “Doped zinc oxide thin films for photodetectors devices”, 7th International Conference on Sciences of Electronics, Technologies of Information and Telecommunications (SETIT2016), pp. 389-392, IEEE Conference Publications (ISBN 978-1-5090-4712-3).
M. Salah, S. Azizi, A. Boukhachem, C. Khaldi, M. Amlouk, and J. Lamloumi (2016), “Preparation and characterization of zinc sulfide thin films through the sulfuration of sprayed zinc oxide thin films”, 7th International Renewable Energy Congress (IREC2016), IEEE Conference Publications (ISBN 978-1-4673-9768-1).
M. Smîri, S. Boussami, T. Missaoui, and A. Hafiane (2016), “The cadmium-binding thioredoxin O actes as an upstream regulator of the redox plant homeostasis”, In: Redox State as a Central Regulator of Plants-Cell, Chapter 13, pp. 275-296, Springer (ISBN 978-3-319-44080-4).
S. Ben Amara, J. Dhahri, and N. Ben Fredj (2017), “Identification of control chart deviations and their assignable causes using artificial neural networks”, In: Lectures Notes in Mechanical Engineering: Design and Modeling of Mechanical Systems III, pp. 845-853, Springer (ISBN 978-3-319-66696-9).
H. Dhiflaoui, and A. Ben Cheick Larbi (2017), “Scratch resistance and wear energy analysis of TiO2 coatings on 316L stainless steel”, In: Lectures Notes in Mechanical Engineering: Design and Modeling of Mechanical Systems III, pp. 405-413, Springer (ISBN 978-3-319-66696-9).
Y. Ben Belgacem, C. Khaldi, and J. Lamloumi (2018), “EIS study of MH negative electrode/electrolyte interface during cycling”, 9th International Renewable Energy Congress (IREC2018), IEEE Conference Publications (ISBN 978-1-5386-0998-9).
M. Lahsini, Y. Ben Belgacem, C.Khaldi, and J. Lamloumi (2018), “Kinetics and corrosion properties of the LaY2Ni9 alloy used as anode for nickel-metal hydride batteries”, 9th International Renewable Energy Congress (IREC2018), IEEE Conference Publications (ISBN 978-1-5386-0998-9).
M. Salah, S. Azizi, C. Khaldi, and J. Lamloumi (2018), “Nanoindentation and AFM characterization of lithium-doped ZnO sprayed thin films”, 9th International Renewable Energy Congress (IREC2018), IEEE Conference Publications (ISBN 978-1-5386-0998-9).
M. Soltani, Y. Belgacem, A. J. Telmoudi, and A. Chaari (2018), “Parameter identification and state of heath evaluation for Nickel-Metal hydride batteries based on an improved clustering algorithm”, 5th International Conference on Control, Decision and Information Technologies (CoDIT2018), pp. 128-133, IEEE Conference Publications (ISBN 978-1-5386-5065-3).
W. Zayani, S. Azizi, K. S. El-Nasser, I. Othman Ali, and H. Mathlouthi (2018), “Structural and electrochemical characterization of new co-doped spinel ferrite nanomaterial used as negative electrode in Ni/MH battery”, 9th International Renewable Energy Congress (IREC2018), IEEE Conference Publications (ISBN 978-1-5386-0998-9).